A Brandt company - serving Dallas, TX

Goodman Capacitor Replacement Nationwide

GoodmanGoodman
AC repairAC repair
Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

Your new heating and cooling system for as low as$119/month*On approved credit; ask for current terms

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

Goodman Capacitor Replacement: The Dallas Owner’s Guide

Goodman capacitor replacement in Dallas typically runs $150 – $320 installed, and we stock compatible capacitors on our trucks for same-day service in most neighborhoods. A capacitor is the small cylinder inside your outdoor condenser unit that gives the compressor and fan motor the electrical jolt they need to start. When it fails, your Goodman unit usually gives you warning signs first: a humming sound with no startup, a fan that won’t spin, or a system that runs but doesn’t actually cool. Here’s what you need to know before calling anyone out.

Call (325) 312-3269

Which Goodman Models This Applies To

Goodman uses two main capacitor types across its residential lines: dual-run capacitors (which serve both the compressor and the condenser fan from one unit) and single-run capacitors (which serve one motor only). Most Goodman condensers from the GSX, GSZ, SSX, and DSXC series built in the last 15 years use a dual-run design, with values commonly ranging from 35/5 µF to 45/5 µF or 60/10 µF on larger units. The best way to confirm what you need is to read the label on the failed part itself, or check the data plate on your condenser: it lists the exact microfarad (µF) rating and voltage your unit was designed for. Never substitute a different microfarad value, even if it physically fits; too high or too low a rating shortens compressor life. We are an independent service provider, not a Goodman affiliate, and we install both OEM Goodman capacitors and quality aftermarket equivalents. In our experience, aftermarket options from AmRad and Titan often outlast OEM units in Dallas heat, and we’ll tell you honestly which one makes sense for your specific model and budget.

Explore

Styles & brands we work with

AC repair
AC repair
Furnace & heating
Furnace & heating
Heat pumps
Heat pumps
Ductless mini splits
Ductless mini splits
Carrier
Carrier
Trane
Trane
Goodman
Goodman

Signs Your Goodman Capacitor Is Failing

  • The unit hums but won’t start. That’s the capacitor trying to deliver a starting jolt and failing. The compressor or fan can’t get over the initial push, so the system just sits there and buzzes. Most Dallas homeowners first notice this on the first hot afternoon after a mild stretch.
  • The condenser fan won’t spin, but you can spin it by hand. If the fan starts moving only after you give it a push with a stick, the capacitor has lost enough power to start the motor on its own. That’s a classic failure signature, not a motor problem.
  • The system runs but blows warm air. Sometimes the fan runs while the compressor doesn’t, so the outdoor unit looks fine but no heat is being moved out of the house. Your inside thermostat reads fine for hours while the house climbs.
  • The breaker trips intermittently. A weak capacitor draws more current than the system was designed for. That overload can trip the breaker at the panel, especially on 100+ degree Dallas days when the unit is already working near its limit.
  • The capacitor body is swollen, cracked, or leaking oil. Capacitors bulge when they fail. A visual check on the outdoor cabinet (power off) will often show the top dome raised or the side split. Once you see that, the part is done, and there’s no debating it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Dallas, a Goodman capacitor replacement runs $150 – $320 including the part and labor. The capacitor itself is usually a $15 – $50 part depending on whether we use a standard dual-run or a premium aftermarket unit. The rest of the cost is diagnosis, installation, and the written guarantee. Here’s what shapes the range:

  • Single vs dual capacitor: Single-capacitor jobs on smaller units start near $150. Dual-run on larger condensers can push toward $320.
  • OEM vs aftermarket: We’ll offer both options with honest input on longevity, but the price difference is modest.
  • Access and location: Condensers mounted on rooftops or in tight enclosures take longer to service safely, so expect the upper end of the range there.
  • Additional parts: If the contactor or wiring shows heat damage, we’ll give you a written price for any additional work before we touch it.

Every capacitor replacement includes a written price before any work starts, and the repair is covered by our 365-Day Done Right Promise. If that new capacitor fails within 365 days, we return at no charge, no argument. That’s a better warranty than most capacitor jobs get, and we put it in writing every time.

DIY or Call Us?

Capacitors store electrical charge even when the power is off. The wrong move with a charged capacitor can cause a serious shock or burn. That said, there are two things you can safely do before calling us: confirm the symptoms (do you hear the hum, is the fan moving), and shut the system off at the thermostat and breaker if it’s struggling. After that, we’d ask you to leave the electrical work to someone trained for it. Every Brandt HVAC technician arrives with a loaded capacitor kit covering the vast majority of residential Goodman models. You’ll know the technician’s name before we send them, see a photo of their face before arrival, and they’ll show ID at the door. If anyone ever shows up unannounced saying they’re from us, they’re not. Call (325) 312-3269 and we’ll confirm exactly who’s coming, when, and what it’ll cost before work begins.

FAQs

Need HVAC help in Dallas? Licensed & insured · 1-hour response · free estimates
Call (325) 312-3269
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Brandt HVAC Co Dallas responds fast. No obligation.

When you submit this form, you accept our Privacy Policy and authorize us to contact you via phone, email, or SMS about your service request, including from the local pros who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch