AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateHVAC Company in Richardson, TX
Richardson’s housing stock runs older than most Dallas suburbs think, and the climate punishes systems that aren’t right. When your air conditioner quits in July or your furnace won’t light in January, you need someone who understands what’s behind the walls here: 1960s tract homes with dated ductwork, 1990s custom builds with cramped attic mechanicals, and humidity that never fully lets up. Brandt HVAC handles AC repair, furnace repair, and AC maintenance across Richardson, always with a written price before work begins. Call (325) 312-3269 any time – a live person answers.
Why Richardson Homes Are Different
Richardson grew in waves, and each wave left its own HVAC footprint. The 1960s and 70s neighborhoods like Reservation and Creek Hollow are full of brick-veneer homes on slab foundations, many still running original or near-original systems. Attic ductwork from that era was often sized for less insulation and fewer heat loads, which means restricted airflow and uneven room temperatures are common even after a new unit goes in. The 1980s and 90s brought larger custom builds, but their mechanical closets and attic access can make replacement work genuinely tight.
Then there’s the Telecom Corridor. The commercial buildings along it demand precision climate control for server rooms, and that expectation has bled into the residential market. Homeowners here tend to ask sharper questions about humidity control, static pressure, and airflow, because they’ve heard those terms from people who run data centers. Add in summer days that regularly top 95°F with high humidity, and the two most common calls we get are for cooling systems that can’t keep up and evaporator coils freezing from airflow problems. Severe storms rolling through north Texas also cause power surges that take out control boards and capacitors. Any repair quote you get in Richardson should account for these realities, not just the price of a part.
Styles & brands we work with
Our Main Richardson Services
Most Richardson homeowners call us first for cooling failures in the summer and heating failures in the occasional cold snap, with maintenance visits scheduled to keep both sides running. Here’s how each of our main Richardson services fits the homes we see.
AC Repair in Richardson
Richardson’s summer heat turns a struggling air conditioner into an emergency fast. The most common repairs we handle in this area are refrigerant leaks on older systems, failed capacitors, and frozen evaporator coils caused by undersized or dirty ductwork. Many homes in the Reservation and Creek Hollow neighborhoods still run R-22 systems, and when those leak, the repair conversation shifts quickly to whether a drop-in replacement makes sense or if it’s time for a full changeout. We walk through those numbers plainly, before any work starts. See AC Repair in Richardson for full pricing and what a same-day visit looks like.
Furnace Repair in Richardson
Richardson winters are variable – mild one week, near freezing the next – and furnaces that sat idle for months tend to show their problems on the first cold morning. Igniter failures, dirty flame sensors, and blower motor issues are the usual culprits in the older brick-veneer homes across the city. Because many furnaces in Richardson are natural gas, we always check for proper venting and carbon monoxide safety as part of any repair visit. If your furnace won’t light or is short cycling, see Furnace Repair in Richardson for what we check and what it costs.
AC Maintenance in Richardson
Given the humidity and the age of much of the equipment in Richardson, an annual tune-up catches problems before they become August emergencies. We check refrigerant pressures, capacitor strength, coil cleanliness, drain line flow, and static pressure – the last one matters a lot in Richardson, where attic ductwork from the 60s and 70s is often undersized by today’s standards. A maintenance visit also gives you a written report of what we found and what we’d watch. Read AC Maintenance in Richardson for the flat price and what’s included.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Richardson
We work on all major residential equipment, including Trane, Lennox, and Goodman units common throughout Richardson. Parts for most repairs are available same-day from local Dallas-area supply houses, which keeps turnaround short. See our brands for the full list of what our techs carry and service.
See the difference
Before
After
Before
After
Before
AfterPricing for HVAC Company in Richardson, TX
| Service | Typical range in Richardson |
|---|---|
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| AC Installation | $3,500 – $7,500 |
| Tune-Up | $80 – $200 |
What pushes a repair toward the top of those ranges in Richardson is usually access: tight attic mechanicals in 1980s and 90s custom builds, or ductwork that needs corrective work in the older neighborhoods. Regardless of where your job lands, you get a written price before any work starts – no exceptions, no surprises after the fact.
Neighborhoods We Serve in Richardson
We cover all of Richardson, including the older tract-home neighborhoods and the newer custom developments. Our technicians know the difference between a slab-foundation 70s build and a pier-and-beam setup, because ductwork runs completely differently in each.
- Reservation
- Creek Hollow
- Canyon Creek
- Breckinridge
- Heights Park
Response time across Richardson is typically same-day for repair calls, with emergency service available around the clock.
Service Area – Cities Near Richardson
In addition to Richardson, our technicians regularly work in Plano, TX, Dallas, TX, Balch Springs, TX, and Grapevine, TX. If you’re not sure whether we cover your address, call and ask – a live person will answer at any hour.
Serving Richardson, TX - Our Local Coverage Area
We’re based in the Richardson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Richardson
Same-day response is typical for repair calls in Richardson, including nights and weekends. If your system is down and the temperature outside is extreme, we treat it as an emergency. Call (325) 312-3269 and a live person will get a technician routed to you.
Most repair work needs no permit. When a permit is required for a full system changeout, Brandt HVAC handles the paperwork and scheduling with the city of Richardson. We’ll tell you before work starts if a permit applies to your job.
Estimates are free. You’ll get a written price before any work begins, and the price we quote is the price you pay – no additional charges after the fact unless you approve a change in scope in writing first.
If your system is struggling in Richardson, call (325) 312-3269. A live person answers 24 hours a day, and every visit starts with a written price – so you know exactly what you’re getting before anyone touches your equipment.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richardson Customers Say
"Fair price on a new contactor and refrigerant top off. Window said between noon and four and he came at nearly four, but he did call. Unit works great."
- Raymond J."Maintenance plan is simple and the tech showed me the readings, not just said it was fine."
- Maribel C."Annual tune-up on the furnace. He cleaned the burners, tested the heat exchanger, and told me what was fine and what to watch. No scare tactics."
- Lorraine E.